Aluminium Collapsible Tube Extrusion Press
All Sizes In Millilitre
Main Technical Parameters: 40 Tons 60 Tons 200Tons
1. Applied diameter: 12-16 12-22 22-35
2. Maximum applied length 100 125 200
3. Production speed: pcs/min 60 60 60
4. Main motor (H.P) 5 7.5 15
Automatic Trimming Machine
Tube thread machine produces threads at the head of aluminum blank from Impact Extrusion Press and cuts off the end. It is the professional tube-making equipment in the field of daily chemical industry and pharmacy industry.It is the independent and automatic unit in the automatic production line. Supply blank from feeding shelf. It works by six mandrels in the following order:tube feeding, thread-cutting, head/end-cutoff, embossing and flattening, tube-relief ad tube output. Then processed tube eters into the successive step through discharge shelf.
For various tubes, user just selects some optional parts. Then machine can work different types.
Main Technical Parameters (Sizes in Millimetre)
- Applied diameter : 12- 50
- Maximum applied length:200mm
- Production speed: 60 pcs/min
- Main motor rate: 3HP &1 H.P
- Dimensions: 1200*1200*1500approx
- Net weight:1200 kg approx
Annealing Furnace
Annealing Machine
In order to make tubes reach usage requirements’ ductility, it is needed to anneal germ tubes.
After slugs are extruded into germ tubes, metallic molecule structure changes and has stress. In order to eliminate this kind of stress and reach required ductility, it has to be annealed.
Annealing oven adopts electricity heating way, tidy and safe. Conveyor chains put every germ tube into “C” type boat. Germ tubes cycle in oven’s chamber with “C” type boat, annealing is finished at this process. Germ tubes are poured at unloading point, and sent to next step by conveyor chains.
Tube-in conveyor chains use stepless speed regulation, which can keep the same pace with previous equipment. Oven chamber uses suspension type structure which is convenient to maintain and makes conveyor boats move smoothly, reducing the phenomenon of tube’s falling and pressing, so it can improve products’ percent of pass. Oven’s internal bladder adopts excellent stainless steel. This equipment also uses excellent heat preservation material and better heat barrier material, greatly cutting down energy and reducing cost.
Main technical parameters:
- 1. Production speed: 60 pieces per min
- 2. Tube specification: φ11mm-φ35mm
- 3. Electro thermal power: 15kw(Can Even Work on Gas Burner)
- 4. Motor power: 0.75KW
- 5. Working temperature: 600 ℃
- 6. Conveying hopper shape: C-shape
- 7. Working time: 150 sec 8. Dimensions (including conveyor chains): 4627×1300×3040 mm
- 9. Net weight: 1800 kg
- 10. Configuration according to the buyers’ specific requirement
Lacquer Machine
his medium-sized machine varnishes the inner walls of 60 collapsible Tubes per minute. The machine is equipped with two Spray Guns for Double Spray. Lacquer Machine is vertically design in two size 16 cups or 32 cups with turret indexing in manifold mechanism. An exhauster is fitted in the machine for the exhaustion of the Superfluous Spray clouds. This part of the Machine is entirely protected by sheet walls coming up to the outer edge of the Turn Table. The Spray Guns are fixed on a vertical sledge moving rhythmically up and down. The Spray Guns only works when Compressed Air is led to them. The Compressed Air feed can be regulated by air valve. The opening of this valve brings air to the Spray Guns even when the Machine itself is not working. This is necessary to adjust the Spraying duration in according with length of the tubes. Spray for different tube lengths are achieved with adjustable on-off timer. No tube no spray.
After the first Coating of Lacquering is dry, and the second Coat is then sprayed as well the Tube is then taken out for Drying of the Lacquer Tubes to be fed in the Drying Oven for the Drying of Tubes. Feeding and take out of Tubes is manual.
Capacity of Machine 16 32
Speed Per Min Tube 60 100
Power 1H.P 1.5 H.P
Spray Guns 2 4
Heater 1.5 1.5
Approx. Round Dia. 1250*1850 1550*2000
Approx. Weight 900kg 1450kg
Base Coating Machine
- Technical parameters
- Tube diameter φ 12-φ 35(mm)
- Tube length ≤ 200(mm)
- Design ability ≤ 60 (tubes/min)
- Total power)2H.P
- Air admission pressure 0.4(Mpa) in automatic
- Dimensions(L× W× H)1200*1200*1200(mm)
- Weight 1550(kg)
Four Color Offset Printing Machine
This four colour Offset Printing Machine is designed for high quality printing at a high speed, wet on wet. the machine is provided with two bearing brackets, between whch the printing cylinder and the machine is getting device are mounted. Though this the machine getting a stability which ensures, smooth and reliable operation. The inking devices can work together or separately. The machine can be adjusted for three, two or single colour printing. All the machine adjustment points are easily accessible and each printing unit can be set independently of the other. For fine register adjustment is provided with the plate rolls both exisly and radically. the individual rubber inking rolls are easily accessible detachable. The zinc plates are fixed firmly on both ends by means of retaining bars or rolls. The printing blanket is fixed securely at both ends to the printing cylinder and can be easily inserted. The turret hed spindle is indexed be Geneva mechanism which runs in oil bath the shafts of turret head run on antifriction bearings. All the shafts are grinding finish and run on Phosporous bronze bushes. The feeding and take out of tubes are done manually.
Technical parameters:
- 1. Diameter: φ 12mm-φ 35mm
- Tube Height 200
- 2. Production ability: ≤ 60 pieces/min
- 3. Motor power: 3 h.p
- 4. Weight: 2550kg
- 5. Dimensions: 2100× 1530× 1600(mm).
Drying Oven
Drying oven for tubes cans and caps Comes with housing on antifriction Bearing .two door opening for easy maintenance net ovene burner value to set the flame and tempera-tor controller. Anti corrosion reduction gearbox and motor Comes with two bearing to adjust adjust
Drying oven comes with stand pillar 7ft height 6" chassis 4 pillar
Latex machine
This latexing machine is specially designed for sealant painting on the tail part of aluminum soft tube. The sealant can help to extend the life span of metal tubes. Latexing machine is an essential device for aluminum manufacturing and it is broadly used in the manufacturing process of shoe polish, toothpaste, daily chemistry, etc. The WT01 latexing machine can be used individually or combined with other related devices to form an automatic aluminum hose production line.
- Productivity ≤60pcs/min
- Aluminum Tube Diameter Φ11-Φ38mm
- Aluminum Tube Length ≤200
- Air Pressure 4.5kg/cm
- Total Power 0.25 H.P. 0.5 H.P
Extrusion Press
This Extruder is a new generation high speed horizontal extrusion All npress. It has good rigidity, high precision, fast speed, stable operation, good safety function. This machine adopts closed-type lubrication system which can avoid the pollution of lubricant’s drops on floor. The equipment use electricity chain operation, so operation is more convenient and reliable. Stroke can stop at any position, mould adjustment is more convenient. Production speed can be freely within a certain range. So it is the ideal equipment for aluminum tubes and cans production.
All Sizes In Millilitre
Main Technical Parameters: 250 Tons 400 Tons
1. Applied diameter: 35-53 45-63
2. Maximum applied length 250 300
3. Production speed: pcs/min 60 60
4. Main motor (H.P) 20 40
Automatic Can Trimming and Brushing Machine
This Machine Cuts the length of can as well as does the brushing of can at the same rotation
this machine has 8 station. with indexing manifold Unit . Auto feed of cans and unfeed of cans
Blower will be attached with for machine for dust collector
Main Technical Parameters (sizes in mm)
- Can Dia 35-63
- Max length 250
- Motor 3 H.P
Varnishing Machine
AUTO BASE FEED VARNISH MACHINE : This machine is very compact and rigid in construction made from high quality cast iron of the base and the body. The drive is through a "V" Belts to the reduction gear box fitted multi disc clutch plate for switching on and off the machine at any stage and any position. The drive of the barrel head of the spindles is by Geneva Mechanism which runs in an oil bath. The manderals and the main shaft run on Antifrication bearing which are carefully selected of high speed which have more load of taking capacity. The manderals carefully selected of high speed which have more load of taking capacity. The inking dust system is also adjustable for the different size and diameter of the tubes. The handwheel is fitted for the setting of the pressure of the tubes and the rubber blanket. An adjustable inking wedge system is provided for the setting of thickness of layer which is to be coated on the tube. The drum takes the ink and mixing roller mixes and the rubber roller takes the ink and the ink is printed on the tube
- Technical parameters
- Tube diameter φ 12-φ 38(mm)
- Tube length ≤ 185(mm)
- Design ability ≤ 60 (tubes/min)
- Total power)2H.P
- Air admission pressure 0.4(Mpa) in automatic
- Dimensions(L× W× H)1200*1200*1200(mm)
- Weight 1550(kg)
- We manufacture Complete New line as well as Single Machines Manual As well as Automatic Machines
- Our machines are are heavy duty Machines which works more then 25 30 years
- We also do Trading in Used line as well as single machines
- All the Machines spare parts are available
- German Like Technology